DokuWiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== RAID ======

===== Create new RAID =====
==== dev nodes: ====
<code>
If you built raid into the kernel as modules
modprobe raid5

Create some nodes
mknod /dev/md0 b 9 0
mknod /dev/md1 b 9 1
mknod /dev/md2 b 9 2
</code>

==== create: ====
<code>
RAID0
mdadm --create --level=0 --chunk=4 --raid-devices=2 /dev/md0 /dev/hde2 /dev/hdg2
mdadm --create --level=0 --chunk=4 --raid-devices=2 /dev/md1 /dev/hde3 /dev/hdg3

RAID1
mdadm --create --level=1 --chunk=32 --raid-devices=2 /dev/md0 /dev/sda3 /dev/sdb3

RAID5
mdadm --create --level=5 --chunk=32 --raid-devices=3 /dev/md0 /dev/sdc2 /dev/sdd2 /dev/sde2
mdadm --create --level=5 --chunk=64 --raid-devices=3 /dev/md1 /dev/sdc3 /dev/sdd3 /dev/sde3

Stop a raid build: mdadm -S /dev/md1

Watch the raid being built: watch -n 10 cat /proc/mdstat
</code>

===== Reassemble RAID =====
  mdadm --assemble /dev/md0 /dev/sda3 /dev/sdb3

===== Take a disk offline =====
<code>

</code>

===== Build a raid from scratch =====

<code>
modprobe raid5

#  mknod /dev/md0 b 9 0   <- not sure needed now, mdadm might create it

fdisk /dev/sdb   g enter, n enter 1 enter enter enter, t raid, w enter
fdisk /dev/sdc   g enter, n enter 1 enter enter enter, t raid, w enter
fdisk /dev/sdd   g enter, n enter 1 enter enter enter, t raid, w enter
mdadm --create --level=5 --chunk=64 --raid-devices=4 /dev/md0 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1

</code>

===== Rebuild array with replaced disk =====

<code>

mdadm /dev/md0 --fail /dev/sdb1 --remove /dev/sdb1 --add /dev/sdf1

</code>

===== Add a new disk to a existing raid =====
  mdadm --manage /dev/md0 --add /dev/hdb1

===== Rename a array =====
  mdadm --stop /dev/md0
  mdadm -A /dev/md6 -m0 --update=super-minor /dev/sda5 /dev/sdb5

===== Boot auto assemble =====
''If you have more then 4 raids then you need to pass the others to the kernel as it will not find these automatically.''

<code>
title Gentoo Linux 2.6.16-gentoo-r7.1
        root (hd0,0)
        kernel /kernel-2.6.16-gentoo-r7.1 root=/dev/md4 md=4,/dev/md0,/dev/md1 md=5,/dev/md2,/dev/md3
</code>

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International